Характеристики
| Параметр |
Значение |
| Цвет: |
Ice Blue |
| Совместимая модель: |
For Airwolf 3D AXIOM, For Airwolf 3D AXIOM Dual Extruder,, For Airwolf 3D AXIOMe, For Anet A8,, For Creality 3D CR-10, For FlashForge Creator Pro,, For Prusa i3, For B9Creations B9Creator,, For CEL Robox, For FDM 3D Printer,, For BQ Hephestos, For BQ Hephestos 2,, For BQ Witbox, For BQ Witbox 2,, For Zortrax M300, For Zortrax M200,, For BEEVERYCREATIVE BEEINSCHOOL, For BEEVERYCREATIVE BEETHEFIRST,, For BEEVERYCREATIVE BEETHEFIRST+, For Dremel 3D20 Idea Builder,, For Makerbot Replicator Z18, For Makerbot Replicator, |
| Материал: |
Polylactic Acid |
| Производитель: |
ELEGOO |
| Тип: |
PLA MATTE |
| Manufacturer Warranty: |
1 Year |
| Filament Diameter: |
1.75 mm |
| Country of Origin: |
China |
| Drying Settings before Printing: |
55 °C for 8h |
| Printing Plate Type: |
Textured or Smooth PEI Build Plate & More |
| Nozzle Adaption: |
Nozzle size ≥ 0.4mm |
| Enclosured Printing: |
not recommended |
| Apply Glue onBuild Plate: |
NO Need |
| Printing and Storing Humidity: |
≤20% RH, Keep sealed, use desiccant against moisture |
| Printing temperature: |
190~230℃ |
| Bed Temperature: |
(varies depending on printer and build plate type)35-65 °C |
| Chamber Temperature: |
20-45 °C |
| Printing Speed: |
<300 mm/s |
| Density: |
1.26 g/cm3 |
| Melt Index: |
9.4 + 1.2 g/10 min |
| Melting Temperature: |
163°C |
| Vicat Softening Temperature: |
63°C |
| Heat Deflection Temperature (0.45MPa): |
55°C |
| Tensile Strength-XY: |
30±1MPa |
| Layer Strength1 - Tensile Strength-Z: |
24 ± 3 MPa |
| Elongation at Break-XY: |
7.9% ± 1.1% |
| Elongation at Break-Z: |
6.5% ± 1.3% |
| Strength - Bending Strength-XY: |
75 ± 3 MPa |
| Layer Strength2 - Bending Strength-Z: |
40 ± 2 MPa |
| Stiffness - Bending Modulus-XY: |
2996 ± 159 MPa |
| Stiffness - Bending Modulus-Z: |
2616 ± 136 MPa |
| Toughness - Impact Strength-XY: |
50.4 + 2.8 kJ/m2 |
| Layer Adhesion Impact Strength-Z: |
6.7+ 1.9 kJ/m2 |
